Current File : //etc/zabbix/zabbix_agentd.conf

# this file is managed by puppet
# do not edit this file.
# this is a config file for zabbix agent (unix)
# to get more information about zabbix, visit http://www.zabbix.com

############ GENERAL PARAMETERS #################


### Option: PidFile
#	Name of PID file.
#
PidFile=/var/run/zabbix/zabbix_agentd.pid


### Option: LogType
#	Specifies where log messages are written to:
#		system  - syslog
#		file    - file specified with LogFile parameter
#		console - standard output
#
LogType=system


### Option: DebugLevel
#	Specifies debug level
#	0 - basic information about starting and stopping of Zabbix processes
#	1 - critical information
#	2 - error information
#	3 - warnings
#	4 - for debugging (produces lots of information)
#	5 - extended debugging (produces even more information)
DebugLevel=3


### Option: SourceIP
#	Source IP address for outgoing connections.
#




### Option: AllowKey
#       Allow execution of item keys matching pattern.
#       Multiple keys matching rules may be defined in combination with DenyKey.
#       Key pattern is wildcard expression, which support "*" character to match any number of any characters in certain position.
#       It might be used in both key name and key arguments.
#       Parameters are processed one by one according their appearance order.
#       If no AllowKey or DenyKey rules defined, all keys are allowed.
#
# Mandatory: no


### Option: DenyKey
#       Deny execution of items keys matching pattern.
#       Multiple keys matching rules may be defined in combination with AllowKey.
#       Key pattern is wildcard expression, which support "*" character to match any number of any characters in certain position.
#       It might be used in both key name and key arguments.
#       Parameters are processed one by one according their appearance order.
#       If no AllowKey or DenyKey rules defined, all keys are allowed.
#       Unless another system.run[*] rule is specified DenyKey=system.run[*] is added by default.
#
# Mandatory: no
# Default:



### Option: EnableRemoteCommands
#	Whether remote commands from Zabbix server are allowed.
#	0 - not allowed
#	1 - allowed
#
EnableRemoteCommands=0

### Option: LogRemoteCommands
#	Enable logging of executed shell commands as warnings.
#	0 - disabled
#	1 - enabled
#
LogRemoteCommands=0



##### Passive checks related

### Option: Server
#	List of comma delimited IP addresses (or hostnames) of Zabbix servers.
#	Incoming connections will be accepted only from the hosts listed here.
#	If IPv6 support is enabled then '127.0.0.1', '::127.0.0.1', '::ffff:127.0.0.1' are treated equally.
#
Server=proxy04.zbx.servers.pt,proxy05.zbx.servers.pt,proxy06.zbx.servers.pt,proxy07.zbx.servers.pt,proxy08.zbx.servers.pt

### Option: ListenPort
#	Agent will listen on this port for connections from the server.
#
ListenPort=10050

### Option: ListenIP
#	List of comma delimited IP addresses that the agent should listen on.
#	First IP address is sent to Zabbix server if connecting to it to retrieve list of active checks.
#



### Option: StartAgents
#	Number of pre-forked instances of zabbix_agentd that process passive checks.
#	If set to 0, disables passive checks and the agent will not listen on any TCP port.
#
StartAgents=3


##### Active checks related

### Option: ServerActive
#	List of comma delimited IP:port (or hostname:port) pairs of Zabbix servers for active checks.
#	If port is not specified, default port is used.
#	IPv6 addresses must be enclosed in square brackets if port for that host is specified.
#	If port is not specified, square brackets for IPv6 addresses are optional.
#	If this parameter is not specified, active checks are disabled.
#	Example: ServerActive=127.0.0.1:20051,zabbix.domain,[::1]:30051,::1,[12fc::1]
#


### Option: Hostname
#	Unique, case sensitive hostname.
#	Required for active checks and must match hostname as configured on the server.
#	Value is acquired from HostnameItem if undefined.
#


### Option: HostnameItem
#	Item used for generating Hostname if it is undefined. Ignored if Hostname is defined.
#	Does not support UserParameters or aliases.
#
HostnameItem=system.hostname

### Option: HostMetadata
#	Optional parameter that defines host metadata.
#	Host metadata is used at host auto-registration process.
#	An agent will issue an error and not start if the value is over limit of 255 characters.
#	If not defined, value will be acquired from HostMetadataItem.
#


### Option: HostMetadataItem
#	Optional parameter that defines an item used for getting host metadata.
#	Host metadata is used at host auto-registration process.
#	During an auto-registration request an agent will log a warning message if
#	the value returned by specified item is over limit of 255 characters.
#	This option is only used when HostMetadata is not defined.
#


### Option: HostInterface
#       Optional parameter that defines host interface.
#       Host interface is used at host auto-registration process.
#       An agent will issue an error and not start if the value is over limit of 255 characters.
#       If not defined, value will be acquired from HostInterfaceItem.
#


### Option: HostInterfaceItem
#       Optional parameter that defines an item used for getting host interface.
#       Host interface is used at host auto-registration process.
#       During an auto-registration request an agent will log a warning message if
#       the value returned by specified item is over limit of 255 characters.
#       This option is only used when HostInterface is not defined.
#


### Option: RefreshActiveChecks
#	How often list of active checks is refreshed, in seconds.
#
RefreshActiveChecks=120

### Option: BufferSend
#	Do not keep data longer than N seconds in buffer.
#
BufferSend=5

### Option: BufferSize
#	Maximum number of values in a memory buffer. The agent will send
#	all collected data to Zabbix Server or Proxy if the buffer is full.
#
BufferSize=100


### Option: MaxLinesPerSecond
#	Maximum number of new lines the agent will send per second to Zabbix Server
#	or Proxy processing 'log' and 'logrt' active checks.
#	The provided value will be overridden by the parameter 'maxlines',
#	provided in 'log' or 'logrt' item keys.
#
MaxLinesPerSecond=100


############ ADVANCED PARAMETERS #################

### Option: Alias
#	Sets an alias for an item key. It can be used to substitute long and complex item key with a smaller and simpler one.
#	Multiple Alias parameters may be present. Multiple parameters with the same Alias key are not allowed.
#	Different Alias keys may reference the same item key.
#	For example, to retrieve the ID of user 'zabbix':
#	Alias=zabbix.userid:vfs.file.regexp[/etc/passwd,^zabbix:.:([0-9]+),,,,\1]
#	Now shorthand key zabbix.userid may be used to retrieve data.
#	Aliases can be used in HostMetadataItem but not in HostnameItem parameters.
#



### Option: Timeout
#	Spend no more than Timeout seconds on processing
#
Timeout=15


### Option: AllowRoot
#	Allow the agent to run as 'root'. If disabled and the agent is started by 'root', the agent
#	will try to switch to the user specified by the User configuration option instead.
#	Has no effect if started under a regular user.
#	0 - do not allow
#	1 - allow
#
AllowRoot=0

### Option: User
#	Drop privileges to a specific, existing user on the system.
#	Only has effect if run as 'root' and AllowRoot is disabled.
#
User=zabbix


### Option: Include
#	You may include individual files or all files in a directory in the configuration file.
#	Installing Zabbix will create include directory in /usr/local/etc, unless modified during the compile time.
#
Include=/etc/zabbix/zabbix_agentd.d


####### USER-DEFINED MONITORED PARAMETERS #######

### Option: UnsafeUserParameters
#	Allow all characters to be passed in arguments to user-defined parameters.
#	The following characters are not allowed:
#	\ ' " ` * ? [ ] { } ~ $ ! & ; ( ) < > | # @
#	Additionally, newline characters are not allowed.
#	0 - do not allow
#	1 - allow
#
UnsafeUserParameters=0

### Option: UserParameter
#	User-defined parameter to monitor. There can be several user-defined parameters.
#	Format: UserParameter=<key>,<shell command>
#	See 'zabbix_agentd' directory for examples.
#
# 	Disabled. A configuration file should be placed on directory: 

####### LOADABLE MODULES #######

### Option: LoadModulePath
#	Full path to location of agent modules.
#	Default depends on compilation options.
#
LoadModulePath=/usr/lib/modules


### Option: LoadModule
#	Module to load at agent startup. Modules are used to extend functionality of the agent.
#	Format: LoadModule=<module.so>
#	The modules must be located in directory specified by LoadModulePath.
#	It is allowed to include multiple LoadModule parameters.
#


####### TLS-RELATED PARAMETERS #######

### Option: TLSConnect
#	How the proxy should connect to Zabbix server. Used for an active proxy, ignored on a passive proxy.
#	Only one value can be specified:
#		unencrypted - connect without encryption
#		psk         - connect using TLS and a pre-shared key
#		cert        - connect using TLS and a certificate
#
# Mandatory: yes, if TLS certificate or PSK parameters are defined (even for 'unencrypted' connection)
# Default:
# TLSConnect=unencrypted


### Option: TLSAccept
#	What incoming connections to accept from Zabbix server. Used for a passive proxy, ignored on an active proxy.
#	Multiple values can be specified, separated by comma:
#		unencrypted - accept connections without encryption
#		psk         - accept connections secured with TLS and a pre-shared key
#		cert        - accept connections secured with TLS and a certificate
#
# Mandatory: yes, if TLS certificate or PSK parameters are defined (even for 'unencrypted' connection)
# Default:
# TLSAccept=unencrypted


### Option: TLSCAFile
#	Full pathname of a file containing the top-level CA(s) certificates for
#	peer certificate verification.
#
# Mandatory: no
# Default:
# TLSCAFile=


### Option: TLSCRLFile
#	Full pathname of a file containing revoked certificates.
#
# Mandatory: no
# Default:
# TLSCRLFile=


### Option: TLSServerCertIssuer
#      Allowed server certificate issuer.
#
# Mandatory: no
# Default:
# TLSServerCertIssuer=


### Option: TLSServerCertSubject
#      Allowed server certificate subject.
#
# Mandatory: no
# Default:
# TLSServerCertSubject=


### Option: TLSCertFile
#	Full pathname of a file containing the proxy certificate or certificate chain.
#
# Mandatory: no
# Default:
# TLSCertFile=


### Option: TLSKeyFile
#	Full pathname of a file containing the proxy private key.
#
# Mandatory: no
# Default:
# TLSKeyFile=


### Option: TLSPSKIdentity
#	Unique, case sensitive string used to identify the pre-shared key.
#
# Mandatory: no
# Default:
# TLSPSKIdentity=


### Option: TLSPSKFile
#	Full pathname of a file containing the pre-shared key.
#
# Mandatory: no
# Default:
# TLSPSKFile=


### Option: TLSCipherCert13
#       Cipher string for OpenSSL 1.1.1 or newer in TLS 1.3.
#       Override the default ciphersuite selection criteria for certificate-based encryption.
#
# Mandatory: no
# Default:


### Option: TLSCipherCert
#       GnuTLS priority string or OpenSSL (TLS 1.2) cipher string.
#       Override the default ciphersuite selection criteria for certificate-based encryption.
#       Example for GnuTLS:
#               NONE:+VERS-TLS1.2:+ECDHE-RSA:+RSA:+AES-128-GCM:+AES-128-CBC:+AEAD:+SHA256:+SHA1:+CURVE-ALL:+COMP-NULL:+SIGN-ALL:+CTYPE-X.509
#       Example for OpenSSL:
#               EECDH+aRSA+AES128:RSA+aRSA+AES128
#
# Mandatory: no
# Default:


### Option: TLSCipherPSK13
#       Cipher string for OpenSSL 1.1.1 or newer in TLS 1.3.
#       Override the default ciphersuite selection criteria for PSK-based encryption.
#       Example:
#               TLS_CHACHA20_POLY1305_SHA256:TLS_AES_128_GCM_SHA256
#
# Mandatory: no
# Default:


### Option: TLSCipherPSK
#       GnuTLS priority string or OpenSSL (TLS 1.2) cipher string.
#       Override the default ciphersuite selection criteria for PSK-based encryption.
#       Example for GnuTLS:
#               NONE:+VERS-TLS1.2:+ECDHE-PSK:+PSK:+AES-128-GCM:+AES-128-CBC:+AEAD:+SHA256:+SHA1:+CURVE-ALL:+COMP-NULL:+SIGN-ALL
#       Example for OpenSSL:
#               kECDHEPSK+AES128:kPSK+AES128
#
# Mandatory: no
# Default:


### Option: TLSCipherAll13
#       Cipher string for OpenSSL 1.1.1 or newer in TLS 1.3.
#       Override the default ciphersuite selection criteria for certificate- and PSK-based encryption.
#       Example:
#               TLS_AES_256_GCM_SHA384:TLS_CHACHA20_POLY1305_SHA256:TLS_AES_128_GCM_SHA256
#
# Mandatory: no
# Default:


### Option: TLSCipherAll
#       GnuTLS priority string or OpenSSL (TLS 1.2) cipher string.
#       Override the default ciphersuite selection criteria for certificate- and PSK-based encryption.
#       Example for GnuTLS:
#               NONE:+VERS-TLS1.2:+ECDHE-RSA:+RSA:+ECDHE-PSK:+PSK:+AES-128-GCM:+AES-128-CBC:+AEAD:+SHA256:+SHA1:+CURVE-ALL:+COMP-NULL:+SIGN-ALL:+CTYPE-X.509
#       Example for OpenSSL:
#               EECDH+aRSA+AES128:RSA+aRSA+AES128:kECDHEPSK+AES128:kPSK+AES128
#
# Mandatory: no
# Default: